Fluorescent Green 3mm Coloured Acrylic Sheet Large Roofing Cast
Board
Coloured Acrylic Sheet fluorescent green 3mm thin large roofing
lucite cast board cut to size
1. Acrylic fluorescent sheet
Acrylic fluorescent plates are mainly used in the outer layer of
LED panels, and many businesses use acrylic fluorescent plates to
make many beautiful handicrafts, and the products themselves have
high light transmittance.
Acrylic is the best new material to manufacture sanitary ware after
ceramics. Compared with traditional ceramic materials, in addition
to its unparalleled high brightness, acrylic has the following
advantages: good toughness, not easy to be damaged; strong
repairability, as long as you use soft foam to dip some toothpaste,
you can wipe the sanitary ware new; soft texture, winter There is
no cold and biting feeling; the colors are bright, which can meet
the individual pursuit of different tastes. Using acrylic to make
basins, bathtubs and toilets is not only beautiful in style,
durable, but also environmentally friendly. Its radiation is almost
the same as that of the human body's own bones. Acrylic sanitary
ware first appeared in the United States and has occupied more than
70% of the entire international market.
2. Parameter
| PROPERTIES | VALUES | RULES |
| Density | 1.19 g/cm3 | ISO 1183-1:2012 Method A |
| Rockwell Hardness | 112L | ISO 2039-2:1999 |
| Tensile Modulus | 3150MPa | EN ISO 527:2012 |
| Tensile Strength | 80.0MPa | EN ISO 527:2012 |
| Tensile Strain at Break | 3.2% | EN ISO 527-1:2012 |
| Water Absorption | 0.20% | ISO 62:2008 Method 1 |
| Total Luminous Transmittance | 93.4% | ISO 13468-1:1996 |
| Vicat Softening Temperature | 105℃ | ISO 306:2013 Method B50 |
| Light Ageing Test- UV Exposure | Grey scale: 5 | ISO 4892-3:2016 Cycle 1 |
| Mean Coefficient of Linear Thermal Expansion | 72×10-6 K-1 | ISO 11359-1:2014 |
| Compressive Stress at Yield | 129MPa | EN ISO 604:2003 |
| Flexural Strength | 120MPa | ISO 178:2013 |
| Compressive Yield Strength | 111MPa | ASTM D695-15 |
| Compressive Modulus | 3450MPa | ASTM D695-15 |
| Shear Strength | 59.7MPa | ASTM D732-17 |
| Deflection Temperature under Load | 100.2℃ | ASTM D648-18 Method B |
| Modulus Elasticity | 2810MPa | ASTM D695-15 |
3. The process of making acrylic sheet
Cutting: Use the cutting machine to continue cutting the acrylic
sheet. It is necessary to clarify the size of the acrylic product
and be able to cut the material correctly, so as to avoid the waste
of materials.
Statue: After the material cutting is realized, according to the
shape of the acrylic product, it is necessary to continue the
preliminary statue of the acrylic sheet, and the statue will be in
the opposite shape.
Trimming: After cutting or sculpting, the edge of the acrylic sheet
is relatively rough, so continue the acrylic trimming solution,
which should be used in a trimming machine.
Punching: A certain process is based on the needs of acrylic
products. Some acrylic products have small round holes. This step
requires a punching process.
Polishing: After cutting, statue and punching, the edges are rough
and easy to scratch the hand. Therefore, the polishing process is
adopted. Polishing is also divided into mound polishing, cloth
wheel polishing and fire polishing. It is necessary to choose the
opposite polishing according to the product. form.
4. Acrylic sheet Application
Acrylic board can also be classified into the category of supplies,
but it is different from the previous category. It belongs to the
part of daily necessities that regulates the sentiment of life. For
example: acrylic photo frame, acrylic fish tank, acrylic box,
acrylic hotel supplies and so on. It is widely used, such as
information racks, acrylic pen racks, acrylic business card cases,
acrylic desk calendar racks, etc. The cosmetics, skin care
products, and jewelry industry used by women all use acrylic
materials to make their display racks.
Acrylic materials are used in many subway stations, warning signs,
large advertising columns, and indoor and outdoor advertising
windows, image boards, light boxes, etc. will use acrylic
materials. Acrylic is used in many large shopping malls or
electronic cities and computer cities, such as: mobile phone
display racks, electronic product display racks, digital camera
display racks, notebook computer display racks, electronic product
display racks, etc. In these products, acrylic display stands made
of acrylic materials are used to set off the products. Acrylic is
chosen because of its high light transmittance. In many shopping
malls and shopping malls, the use of colored lights in the cabinets
to illuminate the acrylic display stand is more dazzling and can
attract customers' attention.
5. XH Company and Production Line
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with
kraft paper or PE film, the cover film does not have any LOGO of
our company.
7.2. Tray package: the total weight of each pallet is about 2 tons,
the bottom is wooden pallet or iron pallet, and the surrounding is
packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about
3000 pieces) 20-foot container, 10-12 pallets.
