10mm Polycarbonate Perspex Roof Sheets PC Solid Transparent Color
10mm transparent polycarbonate sheet roof perspex panels
1. Polycarbonate Sheet
What are the characteristics and functions of PC solid sheets? PC
solid sheets are widely used in daily life and are the mainstream
products in modern sheet construction, but many people do not know
much about the characteristics and functions of PC solid sheets. We
do a detailed introduction.
The characteristics of PC solid sheet
1. Light transmittance of PC solid sheet: The light transmittance
of PC sheet can reach up to 89%, which can be beautiful with glass.
UV coated board will not produce yellowing, fogging and poor light
transmission when exposed to sunlight. After ten years, the loss of
light transmission is only 6%, the loss rate of PVC is as high as
15%-20%, and the loss rate of glass fiber is 12%. %-20%.
2. The impact resistance of PC solid sheet: the impact strength is
250-300 times that of ordinary glass, 30 times that of acrylic
sheet of the same thickness, 2-20 times that of tempered glass, and
there is no crack when dropped from two meters below a 3kg hammer.
; not broken glass"; and "; ring steel"; the laudatory name.
3. Anti-ultraviolet of PC solid board: One side of the PC board is
coated with anti-ultraviolet (UV) coating, and the other side has
anti-condensation treatment, which integrates the functions of
anti-ultraviolet, heat insulation and anti-drip. It blocks UV rays
from passing through and is suitable for protecting valuable
artwork and exhibits from UV damage.
4. Light weight: the specific gravity is only half of that of
glass, saving the cost of transportation, handling, installation
and supporting the frame. Relying on its excellent physical
properties, PC solid sheet has occupied a place in many industries,
especially in the building materials industry and agriculture.
Endurance board is a new type of plastic building material with low
carbon, environmental protection and organic.
2. Parameter
| Proudction Method | Co extrusion |
| Material : | Polycarbonate Granule ; UV inhibitor |
| Color | Clear, blue, bronze, green,opal |
| Light transmittance | 50%--87% |
| Purpose | General |
| Appearance | Smooth |
| UV exposure | UV protection |
| Thickness | 1.5mm, 2.0mm, 3.0mm, 4.0mm, 6.0mm, 8.0mm, 10mm, 12mm, 16mm |
| Width | 1220mm to 2100mm |
| Length | For thickness 1.5mm to 5.0mm : max. 30.5m/roll ; For thickness5.0mm
to 16mm : max.5.8m |
3. Clear polycarbonate sheet features:
Polycarbonate (PC) solar panels have the following performance
characteristics:
1. Temperature adaptability: Polycarbonate solar panels do not
become cold and brittle at -40 °C, and do not soften at 125 °C, and
their mechanics and mechanical properties have no obvious changes
in harsh environments.
2. Weather resistance: The polycarbonate solar panel can maintain
the stability of various physical indicators in the range of -40°C
to 120°C. After 4000 hours of artificial weathering test, the
yellowing degree is 2, and the light transmittance reduction value
is only 0.6%.
3. Anti-condensation: When the outdoor temperature is 0°C, the
indoor temperature is 23°C, and the indoor relative humidity is
lower than 80%, the inner surface of the material will not
condense.
4. Clear polycarbonate sheet Application
Gardens, amusement places strange decoration and corridor pavilions
of resting places;
Interior and exterior decoration of commercial buildings, curtain
walls of modern urban buildings;
Aviation transparent containers, motorcycle front windshields,
airplanes, trains, ships, automobiles, motorboats, submarines and
glass military police shields;
Layout of telephone booths, advertising street signs, light box
advertisements, and exhibitions;
Instruments, meters, high and low voltage switch cabinet panels and
military industries;
High-grade interior decoration materials such as walls, ceilings
and screens;
Noise barriers for highways and urban elevated roads;
Agricultural greenhouses and breeding greenhouses;
Modern ecological restaurant ceiling;
5. XH Company and Production Line
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with
kraft paper or PE film, the cover film does not have any LOGO of
our company.
7.2. Tray package: the total weight of each pallet is about 2 tons,
the bottom is wooden pallet or iron pallet, and the surrounding is
packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about
3000 pieces) 20-foot container, 10-12 pallets.
